DIY Pro peel is our more premium nylon peel ply. This peel ply has a
distinctive red tracer line in the fabric which helps for indentifcation
and placement against the laminate. The material is sutiable for use with
most epoxy, vinylester and polyester component and tooling resins. The use
of a peel ply allows excess resin to bleed out into the material and once
removed from the cured part leaves the laminate with a consistent 'peel
ply' textured finish which provides a fantastic surface for secondary
bonding.
This peel ply is suitable for use using the wet lay or ambient cure
infusion process and can be happily used inside a vacuum bag for those
purposes. It is also our preffered option of peel ply when curing our DIY HQPP range of component oven cure
prepregs should we need to create a seocndary bonding surface.
Pack Sizes
DIY Composites prides itself in offering its Pro Peel in a range of roll widths to suit your project best. We sell in 5
square metre folded packs or rolls (width dependant) or in bulk in 50
linear metre rolls at extremely competative prices. The role widths
available are 300mm / 500mm / 750mm / 1500mm. This gives us 2 fixed price
points depending on whether you buy small packs or the bulk pack. These are
£1.25 per square metre for small packs or £1.15 per square metre for large
packs.